Upravit stránku
Sekačka PS 120 V

Front mounted mower PS 120 V

It is a powerful mower for mowing the first swath or second swath, carried on the front of the mounting plate carrier (MB UNIMOG, tractors middle and higher classes, etc.).
  • The arm drive is from the power hydraulics of the carrier.
  • It is intended primarily for mowing dense and overgrown grass on the first or second swath during the maintenance of adjacent green areas on traffic roads.
  • This mower can be used with a whole range of working heads: cutting head, brush, trough cleaning brush etc..
  • The mower is also protected against hitting an obstacle, tilting the boom and returning it to the working position
  • It is ideal for use together with a universal power arm (eg intermediate axle) for two swaths at once
Žací rameno FFA 400

Power arm FFA 400

It is a lighter universal power arm carried at the front on the clamping plate of the carrier (MB UNIMOG lower series, tractors of middle and lower class, etc.) with a double-sided work system (for mowing on the right and left side).

  • With its concept, it is an arm that can be easily attached and dismantled, with high productivity (thanks, among other things, to the transverse crossing, by which the operator can easily avoid obstacles).
  • The arm drive is either from the front PTO or the power hydraulics of the carrier.
  • This arm can be used with a whole range of working heads: cutting head, drill, brush, bush cutter, branch cutter, ditch cleaner, stump cutter, snow blower, column washer, etc.
  • The lateral reach of the FFA 400 arm is approx. 4.000 mm
Žací rameno FFA 500

Power arm FFA 500

It is a fully professional universal power arm carried at the front on the clamping plate of the carrier (MB UNIMOG, tractors of middle and higher class, etc.) with a double-sided work system (for mowing on the right and left side).
  • With its concept, it is an arm that can be easily attached and dismantled, with high productivity (thanks, among other things, to the transverse crossing, by which the operator can easily avoid obstacles).
  • The arm drive is either from the front PTO or the power hydraulics of the carrier.
  • This arm can be used with a whole range of working heads: cutting head, drill, brush, bush cutter, branch cutter, ditch cleaner, stump cutter, snow blower, column washer, etc.
  • The lateral reach of the FFA 500 arm is approx. 5.000 mm
Žací rameno FFA 700

Power arm FFA 700

It is a fully professional universal power arm carried at the front on the clamping plate of the carrier (MB UNIMOG, tractors of higher class, etc.) with a double-sided work system (for mowing on the right and left side).
  • With its concept, it is an arm that can be easily attached and dismantled, with high productivity (thanks, among other things, to the transverse crossing, by which the operator can easily avoid obstacles).
  • The arm drive is either from the front PTO or the power hydraulics of the carrier.
  • This arm can be used with a whole range of working heads: cutting head, drill, brush, bush cutter, branch cutter, ditch cleaner, stump cutter, snow blower, column washer, etc.
  • The lateral reach of the FFA 700 arm is approx. 7.000 mm
Žací rameno TDH LR TF

Power arm TDH LR TF

These are the front universal power arms, carried in the front three-point hitch, or the front clamping plate of the tractor or the MB UNIMOG carrier.

  • These mowers are suitable for mowing adjacent green areas on roads.
  • They are equipped with a telescopic extension, so they adapt better to the working conditions.
  • The mowers are driven by the front PTO shaft or the carrier's hydraulic system
Žací rameno TDH L TC

Power arm TDH L TC

These are universal power arms carried on the right side between the tractor axles.
  • This solution offers both an optimal view of the working space and an optimal tractor load
  • The arms of the TDH L TC series are the lightest in their class and are used for occasional, undemanding mowing.
  • The drive unit with hydraulic tank is carried in the rear three-point hitch of the tractor.
  • The arm drive is from the rear PTO.
  • This arm can be used with a whole range of working heads: cutting head, drill, brush, bush cutter, branch cutter, ditch cleaner, stump cutter, snow blower, column washer, etc.
Žací rameno TDH M TC

Power arm TDH M TC

These are universal power arms carried on the right side between the tractor axles.

  • This solution offers both an optimal view of the working space and an optimal tractor load
  • The arms of the TDH M TC series are standard, the most used "road workers" from our production.
  • The smallest of the series has a side reach with a cutting head of approx. 5.500 mm, the largest of approx. 7.500 mm.
  • These arms are already commonly used for work along public roads.
  • The drive unit with hydraulic tank is carried in the rear three-point hitch of the tractor.
  • The arm drive is from the rear PTO.
  • This arm can be used with a whole range of working heads: cutting head, drill, brush, bush cutter, branch cutter, ditch cleaner, stump cutter, snow blower, column washer, etc.
Žací rameno TDH P TC

Power arm TDH P TC

These are universal power arms carried on the right side between the tractor axles.

  • This solution offers both an optimal view of the working space and an optimal tractor load
  • The arms of the TDH P TC series are very robust arms, widely used by "road workers" and also suitable for forestry and water management.
  • The smallest of the series has a side reach with a cutting head of approx. 6.500 mm, the largest of approx. 10.000 mm.
  • These arms are already commonly used for work along public roads.
  • The drive unit with hydraulic tank is carried in the rear three-point hitch of the tractor.
  • The arm drive is from the rear PTO.
  • This arm can be used with a whole range of working heads: cutting head, drill, brush, bush cutter, branch cutter, ditch cleaner, stump cutter, snow blower, column washer, etc.
Žací rameno TDH G TC

Power arm TDH G TC

These are universal power arms carried on the right side between the tractor axles.

  • This solution offers both an optimal view of the working space and an optimal tractor load
  • The arms of the TDH G TC series are the most robust arms, with long reaches, suitable for forestry and water management
  • The smallest of the series has a side reach with a cutting head of approx. 10.000 mm, the largest of approx. 15.000 mm.
  • These arms are already commonly used for work along public roads.
  • The drive unit with hydraulic tank is carried in the rear three-point hitch of the tractor.
  • The arm drive is from the rear PTO.
  • This arm can be used with a whole range of working heads: cutting head, drill, brush, bush cutter, branch cutter, ditch cleaner, stump cutter, snow blower, column washer, etc.
Žací rameno TPH P TC

Power arm TPH P TC

These are universal power arms carried on the right side between the tractor axles.

  • This solution offers both an optimal view of the working space and an optimal tractor load
  • The power arms of the TPH P TC series are very robust arms, which are special due to their high attachment of the pivot point of the first boom, allowing it to be flipped over the tractor hood, allowing work in vertical positions (especially when trimming shrubs and branches), right next to the tractor, without overtaking the road.
  • The smallest of the series has a side reach with a cutting head of approx. 6.500 mm, the largest of approx. 10.000 mm.
  • The drive unit with hydraulic tank is carried in the rear three-point hitch of the tractor.
  • The arm drive is from the rear PTO.
  • This arm can be used with a whole range of working heads: cutting head, drill, brush, bush cutter, branch cutter, ditch cleaner, stump cutter, snow blower, column washer, etc.
Žací rameno TLH B TR

Power arm TLH B TR

These are universal power arms carried in the rear three-point hitch of the tractor.
  • The arms of the TLH B TR series are the lightest in their class and are used for occasional, undemanding mowing.
  • They are equipped with a cutting head with a width of 1.000 mm
  • They are designed for small tractors
  • The arm drive is from the rear PTO.
  • This arm can be used with a whole range of working heads: cutting head, drill, brush, bush cutter, branch cutter, ditch cleaner, stump cutter, snow blower, column washer, etc.

Power arm TDH BF TR

These are universal power arms carried in the rear three-point hitch of the tractor.
  • The arms of the TDH BF TR series are specially designed for work on short unloading, while overcoming a high obstacle (vineyards, rows of fruit trees, benches, etc.).
  • Therefore, it finds application mainly in viticulture, fruit growing, park maintenance, etc.
  • The arm drive is from the rear PTO.
  • This arm can be used with a whole range of working heads: cutting head, drill, brush, bush cutter, branch cutter, ditch cleaner, stump cutter, snow blower, column washer, etc.