Search term must have more than 2 characters.
Automatic traffic-cone management system PVK TS
In the standard version, it is a swap body for light vans and transport vehicles with a total operating weight of approx. 3,500 to 6,500 kg and a loading area height of approx. 750 mm to 950 mm.
- It can also be supplied in a variant for the hook carrier of containers of light transport vehicles, for which the height of the loading area does not exceed 1,200 mm.
- The device is equipped with an automatic manipulator with cones and a
Andreas strip layer
It is a swap body for trucks of category N3, equipped with a front clamping plate DIN 76060 size 3/5, which is used for laying and collecting warning strips, without the need for workers to get out of the cab.
- The device is equipped with a hopper for automated laying of 2 sets (2 x 3 pieces) of warning plastic strips with total lengths of 2,235 mm event. 2,025 mm etc.
- The working head itself is equipped with a device for turning the
Tunnel and wall washer
The tunnel washer is a special device for washing tunnel walls and traffic signs.
- It is a special washing head, which is mounted on a suitable front universal power arm with a reach of approx. 5 m or approx. 7 m from the center of the carrier.
- The carrier vehicle is a MB UNIMOG, tractor, or other suitable carrier.
- The working tool is a robust roller brush, equipped with a system of low-pressure and high-pressure water jets for perfect
Trench digger TD 1200
It is a robust device, designed primarily for large tractors with an engine power of min. 100 kW and a total weight of 11,000 - 13,000 kg.
- The machine is carried in the rear three-point hitch of the tractor, the drive is derived from the rear PTO shaft.
- The actual working tool is a robust milling head, suspended on a durable boom.
- The milling head is able to renovate an old clogged ditch, or to create a completely new ditch.
- The
Road side cutter S.P. 61
Cutter type S.P. 61 is a device for removing deposits of any thickness and nature from roadside curbs, with the discharge of milled material into the surrounding space
- The cutter can be connected to the rear three-point hitch of virtually any tractor with an engine power of approx. 100 kW (or to the rear three-point hitch of the MB UNIMOG carrier).
- The main tool here is a strong mechanical scraper and a robust drum with blades, which
Road side cutter BSL 40/75
The BSL 40/75 road side cutter is a device for removing deposits of any thickness and nature from roadside curbs, with the transport of milled material to the body of a moving truck in front.
- This cutter is then suitable for aggregation with larger tractors with a total weight of 11,000 - 13,000 kg.
- A mechanical, adjustable scraper (or two hydraulically driven cutting discs) feeds the material to the throwing wheel, which throws it
Road side cutter ZR BSL 40 P
High-performance special, self-propelled machine, designed for trimming curbs on a high scale, with the possibility of working under crash barriers.
- This machine is equipped with a mechanical, adjustable scraper, which brings the material to the throwing wheel, which throws it on a 5m long conveyor belt, resulting in a body, in front of a pushed truck.
- This machine is complemented by a rear roller brush, which cleans the road from
Municipal modifications of chassis, category N and T
Communal modifications, consisting in the completion consists in the installation of the rear support frame of vehicles cat. N, front clamping plate, working hydraulics and additional combined work lights, or installation of various torsion frames and blocking the swing of the front axle for carriers cat. T
- We carry out the completion of category N carriers on already registered chassis
- Such chassis are then able to legally carry any