Search term must have more than 2 characters.
Spreader TS
Self-loaded spreader with constant width of spread, mounted in the rear three-point hitch of the tractor.
- Possibility of control either directly on the spreader or from the driver's cab
- Spreading dose control
- The possibility to use all types of spreading materials (salt, gravel, sand)
- It is produced in four sizes, from a hopper volume of 680 l to 1.870 l.
- Drive from tractor hydraulics.
Spreader TS D
Self-loaded spreader with variable width of spread, mounted in the rear three-point hitch of the tractor.
- Control from simple on the spreader, through standard electric from the driver's cab, to fully automatic depending on travel speed, with feedback
- The possibility to use all types of spreading materials (salt, gravel, sand)
- It is produced in four sizes, from a hopper volume of 750 l to 1.870 l.
- Drive from tractor hydraulics.
Spreader TS 2500 D
Large volume spreader with variable width of spread, mounted in the rear three-point hitch of the tractor of the total weight of 13.000 kg and more.
- This spreader is not self-loading. It is loaded using a loader or from a silo
- The spreader has an integrated parking system
- Control from simple on the spreader, through standard electric from the driver's cab, to fully automatic depending on travel speed, with feedback
- The possibility
Spreader TS 3000 D
Classical spreaders, mounted on a tow.
- Hopper volume most in the range 3.000 – 8.000 l
- Spreaders of this type can also be equipped with a complete automatic brine management system
- Of course, there is also the possibility of fully automatic control, depending on the travel speed of the tractor
- The chassis itself is very often designed as a multipurpose carrier, so it is possible to dismantle the spreader from the chassis and use