Search term must have more than 2 characters.
Snow plough DP2LP
These are special snow ploughs, with a continuously expandable both parts of the shield on the left and right side, weighing approximately 1.680 – 1.800 kg.
- On the one hand, these ploughs can minimize their transport width (by pulling the shield) and at the same time use the entire width of the shield in the extended state.
- Another advantage of these ploughs is that their working width is in each position of extension of the shield
Snow plough LLV DB
The LLV DB series snow ploughs are based on the classic LLV plough concept, supplemented by a second blade that works at the same time as the first blade.
- Working with this type of plough is then very efficient
- These ploughs are used mainly on roads with a quality surface, on motorways, where great emphasis is placed on thorough road cleaning.
Snow plough LLV 43 T
This is a special snow plough, designed for removing snow from motorways, when it is necessary to throw snow over a crash barrier.
- Thanks to the shape of its shield, the plowed snow gains high dynamics and is thrown over the barrier by means of a side hydraulically operated damping flap.
- In this way, it is possible to regulate both the height and the snow throw distance of this plough.
Snow plough RTZ
Snow ploughs with hydraulic turning, carried in the rear three-point tractor hitch.
Snow plough UP L
These are arrow snow ploughs with a continuously adjustable geometry of both wings, which can create shapes from an arrow blade, a gradual transition through the classic to the rolling shape of the "cornet".
- Thanks to the variability of the setting of both wings, but the lighter construction and the segment-divided, sprung blade, these ploughs are used mainly in urban areas.
- These ploughs are made exclusively of all-steel
- Depending
Snow plough UP
These are arrow snow ploughs with a continuously adjustable geometry of both wings, which can create shapes from an arrow blade, a gradual transition through the classic to the rolling shape of the "cornet".
- Thanks to their variability of setting of both wings, these ploughs find universal use
- These ploughs are made exclusively of all-steel
- Depending on their size, ploughs weigh is approximately 700 – 1.200 kg
Snow plough Pure Alpha
It is a special low-profile snow plow, designed for installation in the bottom of the carrier vehicle between the axles, which is used either to clean the road from the rest of the snow (even hardened), or to remove the snow layer in difficult-to-pass agglomerations.
- This type of snow plow has a blade with a fixed turn to the right of 250 and can often be installed on chassis, where a plow with a hydraulically adjustable blade cannot be
Snow plough Pure Omega
It is a special low-profile snow plow, designed for installation in the bottom of the carrier vehicle between the axles, which is used either to clean the road from the rest of the snow (even hardened), or to remove the snow layer in difficult-to-pass agglomerations.
- This type of plow has a blade with hydraulic turning left / right and can be used for possible double-sided use.
- The snow plow is equipped with continuously hydraulically
Spreader TS D N
Smaller spreader with variable width of spread, mounted in the rear three-point hitch of the tractor.
- Control from simple on the spreader, through standard electric from the driver's cab, to fully automatic depending on travel speed, with feedback
- The possibility to use all types of spreading materials (salt, gravel, sand)
- It is produced in four sizes, from a hopper volume of 360 l to 600 l.
- Drive from tractor hydraulics.
Spreader TS
Self-loaded spreader with constant width of spread, mounted in the rear three-point hitch of the tractor.
- Possibility of control either directly on the spreader or from the driver's cab
- Spreading dose control
- The possibility to use all types of spreading materials (salt, gravel, sand)
- It is produced in four sizes, from a hopper volume of 680 l to 1.870 l.
- Drive from tractor hydraulics.
Spreader TS D
Self-loaded spreader with variable width of spread, mounted in the rear three-point hitch of the tractor.
- Control from simple on the spreader, through standard electric from the driver's cab, to fully automatic depending on travel speed, with feedback
- The possibility to use all types of spreading materials (salt, gravel, sand)
- It is produced in four sizes, from a hopper volume of 750 l to 1.870 l.
- Drive from tractor hydraulics.
Spreader TS 2500 D
Large volume spreader with variable width of spread, mounted in the rear three-point hitch of the tractor of the total weight of 13.000 kg and more.
- This spreader is not self-loading. It is loaded using a loader or from a silo
- The spreader has an integrated parking system
- Control from simple on the spreader, through standard electric from the driver's cab, to fully automatic depending on travel speed, with feedback
- The possibility